ISO Container 20, 267 975-8

ISO container of size 20 feet (6 meters) in quality IICL 6 represents a high standard in the field of shipping containers. Certification IICL 6 (International Institute of Container Lessors) means that the container meets strict requirements for strength, tightness, corrosion resistance and functionality of all structural elements. This quality level ensures that the container is suitable even for demanding conditions in transport and long-term storage. Each piece is carefully inspected and maintained so that it is ready for immediate use without the need for further modifications. Container transport to Český Brod and elsewhere in the Czech Republic is free upon fulfillment of the conditions below!

Dimensions, load capacity and volume of 20-foot container

• Length: 6 058 mm (20 feet)
• Width: 2 438 mm
• Height: 2 591 mm (8’6″ – standard Dry Van)
• Internal dimensions: approx. 5 898 × 2 352 × 2 393 mm
• Type: ISO container 22G1

These parameters allow safe storage and transport of a wide range of materials and goods. Dimensions are approximate and may vary slightly depending on the manufacturer.

ISO Container Equipment:

• Vertical locking 4 bars (Locking bars) – 4-Lock Bars
• Lock box lock
• Bottom handling tunnels – Forklift Pockets
• Labyrinth ventilation grilles (allow air through but not rain) – 10 pieces
• Door retainers

Other designations and certifications:

• Certification mark iC 70 – certified for rail transport under British Railways IC70 certification
• ISO container 22G1
• Basic Dry Van (DV) height 2.6 m = 8’6″

Load optimization: From load capacity to interior space

• Maximum container weight (MAX GROSS – M.G.W.) 30 480 kg – 67 200 lb
• Container weight (TARE) 2 100 kg – 4 630 lb
• Maximum net load weight (NET/PAYLOAD) 28 380 kg – 62 570 lb
• Maximum interior volume (CU. CAP.) 33.2 m³ (cubic meters) – 33.2 CU.M. – 1 170 CU.FT.

Color RAL 7016 – modern appearance and practical advantage

This ISO container is equipped with quality paint in the shade RAL 7016 – anthracite gray. This color is not only visually attractive and modern, but also has practical advantages. Anthracite gray fits perfectly into industrial areas, storage zones and company premises where emphasis is placed on a representative appearance. At the same time, this shade is less prone to visible traces of dirt or wear and contributes to better heat dissipation in hot months.

Equipment that facilitates daily operations

This ISO container type 22G1 in basic Dry Van (DV) design with height 2.6 m (8’6″) represents a top-class solution for storage and transport. It has four vertical locking bars (4-Lock Bars), which ensure maximum door security during handling and transport. Thanks to the lock box lock, the container contents are protected against unauthorized access, which brings peace of mind when storing valuable material.

Another significant advantage is the bottom handling tunnels (forklift pockets), which allow easy and safe loading of containers with a forklift. Labyrinth ventilation grilles then ensure circulation of fresh air inside the ISO container without allowing moisture or rain to penetrate – ideal for storing materials sensitive to moisture.

Each of the ten pieces of this container type is additionally equipped with door retainers, which facilitates handling and securing doors during loading and unloading.

Certification for rail transport

A significant benefit is the iC 70 certification mark – the container is certified for rail transport under the British Railways IC70 standard. This guarantees compliance with strict safety and durability requirements for rail transport, which expands the possibilities of use in combined transport.

Why is this equipment ideal for woodworking companies

The woodworking industry emphasizes safe, dry and well-ventilated storage and transport of products and semi-finished goods – this is exactly where this ISO container excels. Labyrinth ventilation grilles allow moisture to escape and prevent wood from becoming musty, which is key to maintaining material quality. Four locking bars and a lock box lock are a guarantee that expensive wood, plywood or finished products remain safe from theft and damage.

Bottom handling tunnels (forklift pockets) allow quick handling of containers and heavy goods directly in the manufacturing plant or on the storage yard, saving time and labor.

Container use for storage and transport

For the needs of woodworking companies, this ISO container offers universal use. For storage purposes, it is suitable for storing raw wood, lumber, plywood, wooden semi-finished products, pallet goods, finished products or, for example, wooden packaging. Thanks to a safe and dry environment, you can also store materials prone to moisture or temperature changes without damage.

When transporting by road, rail and sea, the ISO container is ideal for export and domestic transport. IC70 certification allows transport within the rail network, which brings cost savings and faster availability of goods at the destination.

How much fits in a 20-foot container?

A standard 20-foot ISO container with a height of 2.6 m (8’6″) offers approximately 33 m³ of interior space and a load capacity of around 28 tons. This means that one container can efficiently accommodate, for example, several pallets of lumber, finished products or larger quantities of packaged material. For woodworking companies, this means the ability to transport or store an entire series of products at once, which improves logistics efficiency and reduces costs.

Various types of storage and transport

The ISO container is ideal not only for storing raw wood, but also for archiving finished products, seasonal storage or long-term storage of machinery and equipment. Thanks to high load capacity and robust construction, you can also transport heavy loads or machinery used in the woodworking industry.

When transporting, you can use the container to export goods abroad by sea, rail and road. Handling tunnels allow quick loading and unloading even in limited spaces.

Other possible uses

The ISO container can also be used as a mobile workshop, temporary tool storage, protection of machinery from weather conditions or as a basis for modular buildings in woodworking company premises.

Who is this container intended for

This type of ISO container is an ideal choice for all woodworking companies, manufacturers of wooden components, carpentry workshops, furniture manufacturers, timber wholesalers or logistics companies focused on transporting wooden products. It is also suitable for companies that need to safely and efficiently store or transport wood and wooden products in changing weather conditions.

Choose a solution that combines safety, flexibility and efficiency in one – ISO container 22G1 with IC70 certification is a clear choice for modern woodworking companies.

Transport to you – Český Brod and the entire Czech Republic

We provide transport of this shipping container not only to Český Brod, but also anywhere throughout the Czech Republic. When purchasing two units of size 8′, 10′, 20′, or one unit of 40′/45′ container, we offer free transport to one destination. Transport of only one container within the Czech Republic up to size 20′ is 140€ without VAT = 170€ with VAT. Outside the Czech Republic, transport must be quoted individually according to the destination. Unloading at the site is then provided by the customer with their own crane.

ISO container 20 feet IICL 6 RAL 7016 is a universal choice for any woodworking company looking for a reliable, safe and flexible way to store and transport material and products. With us, you get not only a quality container, but also complete service including transport throughout the Czech Republic.