Shipping containers Ulm Germany

16. 7. 2026

Ulm — a city on the Danube, known to everyone at least thanks to its world-famous Minster with the tallest church tower in the world. For Czechs, however, Ulm has a far more practical significance: it is one of the most accessible German logistics centers, where shipping containers can be purchased favorably — whether new, one-way, or used. This guide was created to summarize everything important in one place: from an overview of sellers, through current prices and container types, to a practical guide on how to transport a container from Ulm to the Czech Republic.

Definition: A shipping container (also known as an ISO shipping container, a transport container, in German Seecontainer or Frachtcontainer) is a standardized steel transport unit according to ISO standards, designed primarily for maritime, rail, and road transport of goods. Today it also serves as a storage space, construction module, or the basis for container homes.

What are shipping containers and why buy them specifically in Ulm?

The historical significance of Ulm as a logistics center

Ulm lies at the strategic crossroads of two key European motorway routes — A7 (north–south) and A8 (east–west). This location made it a natural logistics hub since the Middle Ages, when trade routes led along the Danube. Today, in the Donautal industrial zone, major companies such as Daimler Truck, Airbus Defence and Space, Nokia, MBDA, and Ratiopharm are headquartered. It is precisely these companies that generate constant demand for container solutions — from storage containers and office modules to special cooling units.

For Czech buyers, Ulm is also extremely attractive from a geographical point of view: it lies approximately 330 km from Prague, 280 km from Pilsen, and only 220 km from České Budějovice. In terms of container transport on a flatbed truck or by hydraulic crane, this is a distance that can be covered in a single day.

What types and dimensions of shipping containers are available?

Standard container types

On the market in Ulm you will encounter the following basic shipping container types:

  • Dry Van (DV) — dry closed container: The most common type, a fully enclosed steel box with double-wing doors on one side. Suitable for storage, transport, and conversion.
  • High Cube (HC): Same construction as Dry Van, but 30 cm taller (external height 2,896 mm instead of 2,591 mm). Ideal for bulkier goods or for more comfortable movement inside.
  • Open Top: A container with an opening roof (tarpaulin), designed for top-loading by crane.
  • Flat Rack: A container without side walls and a roof — only the floor and end walls. For oversized cargo.
  • Reefer (refrigerated container): An insulated container with an integrated cooling unit. Designed for food, pharmaceuticals, and temperature-sensitive goods.
  • Double Door: A container with doors at both ends — practical for through access.

Dimensions and parameters

The following table summarizes the key parameters of the most common ISO shipping container sizes:

Type of containerExternal dimensions (l × w × h)Internal dimensions (l × w × h)Volume (m³)Area (m²)Weight (empty)Max. payload
10 foot (10ft)2.99 × 2.44 × 2.59 m2.83 × 2.35 × 2.39 m15.9 m³6.66 m²~1,300 kg~8,700 kg
20 foot (20ft) — 1 TEU6.06 × 2.44 × 2.59 m5.90 × 2.35 × 2.39 m33.1 m³13.88 m²~2,200 kg~21,800 kg
20 foot High Cube (20ft HC)6.06 × 2.44 × 2.90 m5.90 × 2.35 × 2.69 m37.4 m³13.88 m²~2,300 kg~21,700 kg
40 foot (40ft) — 1 FEU12.19 × 2.44 × 2.59 m12.03 × 2.35 × 2.39 m67.7 m³28.37 m²~3,800 kg~26,600 kg
40 foot High Cube (40ft HC)12.19 × 2.44 × 2.90 m12.03 × 2.35 × 2.70 m76.4 m³28.37 m²~3,900 kg~26,100 kg

TEU (Twenty-foot Equivalent Unit) is the standard unit in container transport. One 20-foot container = 1 TEU, one 40-foot container = 2 TEU.

Which type of container is suitable for you?

The choice depends primarily on the intended use:

  • Storage of tools, materials, seasonal items: 10ft or 20ft Dry Van is ideal — compact, affordable, and easy to place.
  • Workshop, garage, hobby space: 20ft High Cube — the higher ceiling provides more comfortable movement and the possibility of installing shelves, lighting, and a workbench.
  • Conversion into a living space (tiny house, cottage): 40ft High Cube — maximum space for full-fledged living. Can be divided into rooms.
  • Construction company, larger warehouse: 40ft Dry Van or HC — sufficient space for materials, machines, and equipment.
  • Food industry, pharmaceuticals: Reefer (refrigerated container) — necessary for keeping goods at a controlled temperature.

How much does a shipping container cost in Ulm in 2026?

Current price range

Shipping container prices in Ulm depend on size, condition, and type. The following table is based on a market survey of the above-mentioned sellers (January–July 2026) and lists prices in euros excluding VAT:

Type and sizeUsed (AS-IS)Used (Cargo Worthy)One-Way (1 trip)NewRental (monthly)
10 foot——2,900–3,400 €3,400–4,200 €80–110 €
20 foot850–1,650 €1,650–2,500 €1,850–2,500 €2,900–4,800 €110–165 €
20 foot HC1,200–1,900 €1,900–2,800 €2,200–2,900 €3,200–5,200 €130–180 €
40 foot1,100–2,280 €2,280–3,200 €2,500–3,500 €3,800–5,900 €165–220 €
40 foot HC1,450–2,550 €2,550–3,800 €2,800–3,900 €4,200–6,700 €165–220 €
Reefer 20 foot3,500–5,900 €5,900–9,500 €—9,500–15,000 €495–770 €

Note: Prices are indicative and valid for the Ulm area and surroundings. Transport is not included. Prices at specific depots may vary according to current warehouse availability.

Buy vs. rent — which is more worthwhile?

Deciding between buying and renting a shipping container depends on the length of use:

  • Short-term projects (up to 6 months): Rental by all means. You save on initial investment and don’t have to deal with subsequent resale. The monthly rental of a 20-foot container works out at 110–165 €.
  • Medium-term use (6–24 months): Here it is already worth considering buying a used container. At a rental price of 150 €/month, you will pay 3,600 € over 2 years — for this amount you can purchase a used 20-foot container including transport.
  • Long-term use (2+ years): Buying by all means. Containers made of Corten steel have a lifespan of 20–30 years and retain their residual value. A one-way container can be sold after years for 50–70 % of the purchase price.

THE COMPANY HZ CONTAINERS DOES NOT OFFER RENTAL OF SHIPPING CONTAINERS IN GERMANY.

Customs and tax aspects

Since both Germany and the Czech Republic are EU member states, the following rules apply to the purchase of a shipping container:

  • No customs duty: Within the EU single market, no customs duty is paid.
  • VAT: The German seller invoices without VAT (0 %) if the buyer provides a valid VAT ID. The Czech buyer then pays VAT in the Czech Republic (21 %) by means of self-assessment (reverse charge).
  • Individuals (non-business persons): The seller in Germany charges German VAT (19 %). This VAT can no longer be deducted in the Czech Republic.
  • Environmental charge: Some German cities (including Ulm) have a so-called Umweltzone (low-emission zone). Vehicles must have a green sticker to enter. When transporting a container from the Donautal industrial zone, however, this requirement mostly does not apply to trucks.

What to watch out for when buying a shipping container in Germany?

Checking the condition of the container

Before buying — and especially before paying — check the following:

  • CSC plate (Convention for Safe Containers): Every operational container must have a valid CSC plate with the date of the last inspection. Validity is 30 months. If the plate is missing or expired, the container cannot be transported legally.
  • Corrosion: Light surface rust is common and harmless on used containers. The problem is deep corrosion, especially at the corners, hinges, and bottom frame.
  • Tightness (WWD — Wind- und Wasserdicht): Check the door sealing, the condition of the roof and the floor. Even a slight leak can cause water ingress and damage to the stored contents.
  • Floor: The wooden floor should be firm, without rot, without odor, and without signs of pest infestation. With used containers, check whether the floor has been exposed to chemicals.
  • Doors: Open and close both wings. They should move smoothly, without sticking. Check the locks and sealing mechanisms.

Legal and building regulations in Ulm

When placing a shipping container on a plot in Ulm, similar rules apply as throughout Germany:

  • Area up to 20 m² and temporary use: Usually a notification (Bauvoranfrage) is sufficient. A 20-foot container has an area of ~14 m², so it falls into this category.
  • Area above 20 m² or permanent use: Requires a building permit (Baugenehmigung). A 40-foot container (~28 m²) typically already needs a permit.
  • Historic and heritage zones: Ulm’s old town has stricter aesthetic regulations. In these areas, the placement of containers may be restricted or subject to additional modifications (wooden cladding, color matching).
  • Before placing any container, consult the building authority (Bauamt) of the city of Ulm.

Most common mistakes and how to avoid them

  • Underestimating transport: The transport price can amount to 20–40 % of the total costs. Before buying, always check whether the seller delivers to the Czech Republic and at what price.
  • Hidden defects: With containers labeled “AS-IS” (as-is), the seller gives no warranty for the condition. These containers are significantly cheaper, but the risk of hidden defects is higher.
  • Failure to verify the seller: There are also resellers with a dubious reputation on the market. Check whether the seller has a fixed address, VAT ID (USt-IdNr.), and references.
  • Forgetting the base: A container cannot be placed on bare ground. You need a firm and level base — concrete panels, a gravel bed, or at least wooden sleepers. Without a proper base, there is a risk of corrosion of the bottom frame and problems with opening the doors.

Frequently Asked Questions (FAQ)

Is a building permit required for a shipping container in Ulm?

For a container up to 20 m² (typically 20 foot) with temporary use, a notification is usually sufficient. For larger containers (40 foot) or permanent structures, a building permit is required. Always consult the building authority of the city of Ulm (Bauamt), especially if the plot is located in a heritage zone.

What is the difference between a one-way and a used container?

A one-way container has completed only one sea voyage from Asia to Europe. It is practically new, with minimal signs of wear. A used container has made several voyages and may show signs of wear — scratches, light rust, worn floor. The price difference between one-way and used is usually 300–700 €.

Is customs duty paid when buying a container in Germany?

No. Within the European Union, no customs duty is paid. When buying as a company with a VAT ID, reverse charge applies (you pay VAT in the Czech Republic at a rate of 21 %). Individuals pay German VAT (19 %).

Which type of container is most suitable for conversion into a dwelling?

For conversion into a living space (tiny house, cottage), the 40 foot High Cube is most often used — it offers the largest internal volume (76.4 m³) and an increased ceiling (2.70 m inside), which allows comfortable installation of insulation, suspended ceilings, and technical installations.

What does the designation WWD mean on a shipping container?

WWD (Wind- und Wasserdicht) means that the container is resistant to wind and water — i.e., it is tight. This designation is standard for one-way and Cargo Worthy containers. For used AS-IS containers, WWD is not guaranteed.

What are the alternatives to Ulm for buying a shipping container in Germany?

Other German cities with container depots within reach of the Czech Republic include Nuremberg (170 km from the border), Munich (200 km), Dresden (50 km), Leipzig (120 km), and Hamburg (port, the largest selection, but a longer distance). Ulm represents an optimal compromise between selection, price, and distance.



More container news...

When 40 feet is too much and 20 is not enough: Professional, tailor-made shortening of a shipping container

17. 11. 2026

Need more than a 20ft container without the 40ft footprint? Discover our tailor-made shortening to 30ft with original double doors, anti-corrosion care & 100% watertight joints.

Corner Casting Lifting & Stacking

13. 11. 2026

A corner casting is the standardized steel fitting welded into all eight corners of an ISO shipping container, and it is the single most important structural interface in modern intermodal transport. Every time a crane lifts a 30-ton container, every time a stack of boxes rides nine or ten high across the ocean, and every time a container is locked to a truck chassis or rail car, the entire force of the operation travels through these unremarkable-looking metal blocks.

What Are the Internal Dimensions of a 40 Foot Container?

10. 11. 2026

A standard 40-foot dry shipping container has internal dimensions of 12,032 mm in length, 2,352 mm in width, and 2,395 mm in height — or approximately 39 feet 5⅝ inches × 7 feet 8⅝ inches × 7 feet 10¼ inches. These figures come from the published specifications of major shipping lines and align with the ISO 668 international standard for Series 1 freight containers. The internal capacity is roughly 67.7 cubic meters (2,390 cubic feet).

what is the internal dimensions of a 40 foot container

9. 11. 2026

A standard 40-foot shipping container has internal dimensions of approximately 12.032 meters (39 feet 5⅝ inches) in length, 2.352 meters (7 feet 8⅝ inches) in width, and 2.395 meters (7 feet 10¼ inches) in height. These internal dimensions are significantly smaller than the external dimensions because the corrugated steel walls, structural frame, corner posts, and the floor system—composed of plywood and steel—occupy valuable space intended for cargo.