Used 20ft shipping container Prague

29. 7. 2026

Looking for a used 20ft shipping container in Prague and not sure where to start? You are not alone. The 20-foot container is the most sought-after format on the Czech market — whether you need it as a tool storage on a construction site, a secure space for materials, or a basis for a future conversion into a workshop or garden house. Prague and its surroundings also belong to the regions with the highest concentration of dealers and depots, so the selection is wide. But it is precisely in that breadth that a beginner can easily get lost.

How much does a used 20ft shipping container cost in Prague?

The price of a used 20ft container depends primarily on its technical condition and quality category. In the Prague region, you are currently looking at the following ranges:

Quality categoryApproximate price (excl. VAT)Typical condition
AS IS / decommissioned35,000 – 39,000 CZKVisible wear, possible corrosion, but still watertight
Cargo Worthy (CW)39,000 – 49,000 CZKDry, tight, functional doors and sealing, valid CSC plate
One Way / IICL55,000 – 69,000 CZKAlmost new, no corrosion, only one voyage from Asia

Important: All prices listed are exclusive of 21% VAT. Transportation must also be added to the final amount, which in Prague and surroundings ranges between 3,500 and 8,000 CZK depending on the exact distance from the depot.

Prices change slightly over time depending on global demand for maritime transport and the availability of containers in European ports. However, over the last two years, the market has remained relatively stable, and significant fluctuations are rather the exception.

Prices change slightly over time depending on global demand for maritime transport and the availability of containers in European ports. However, over the last two years, the market has remained relatively stable, and significant fluctuations are rather the exception.

Dimensions and parameters of a 20ft shipping container

Before you start selecting a specific piece, it is worth knowing the exact dimensions. A standard 20-foot container (also referred to as 20′ GP or 20′DV) is not just a “large tin box” — its parameters are strictly standardized according to the ISO standard.

ParameterValue
External length6,058 mm
External width2,438 mm
External height2,591 mm
Internal length5,898 mm
Internal width2,352 mm
Internal height2,393 mm
Internal volumeapprox. 33.2 m³
Empty container weightapprox. 2,200 kg
Maximum load capacityapprox. 28,300 kg
MaterialCOR-TEN steel (corrosion resistant)
FloorWooden (plywood approx. 28 mm thick)

Why are these figures important? First — you need to know whether the container will even fit on your land and whether handling equipment has access to it. Second — a weight of over 2 tons means the container cannot be moved without heavy equipment. Third — an internal volume of 33 m³ corresponds roughly to the volume of a smaller garage, which is absolutely sufficient for most storage needs.

Tip: If you need a higher ceiling, there is also a 20′ High Cube (HC) variant with an external height of 2,896 mm. However, this is less common on the Czech market and usually 10–20% more expensive.

Where to buy a used 20ft shipping container in Prague?

The Prague market with shipping containers is quite well developed. Both specialized dealers with their own depots and listing aggregators operate here.

HZ Containers

The largest player on the Czech market with its own depot in Prague. It offers a wide range of containers across all quality categories — from cheap AS IS pieces for 35,500 CZK to almost new One Way models. The strengths are transparent pricing policy (each container has its own page with detailed photographs) and in-house transport throughout the Czech Republic. Transport of one 20-foot container within the Czech Republic costs 3,500 CZK excl. VAT.

Quality categories: What do Cargo Worthy, AS IS and One Way mean?

When buying a used container, you will come across three main quality designations. Each means something different and the price difference between them can be tens of thousands of crowns.

AS IS (“as it stands”)

This is the cheapest category. The container is sold in the condition in which it arrived from the port — without repairs, without warranties. It may have minor dents, surface corrosion or scratched paint. But it is important that even an AS IS container should be watertight — if it leaks, it is not suitable even for storage. This category is ideal for undemanding storage of building materials, tools or waste.

Cargo Worthy (CW)

The middle path chosen by most buyers. The Cargo Worthy designation means that the container is fully functional, dry, tight and has a valid CSC plate. The doors close well, the rubber seal is intact, the floor is solid. The container is technically fit for further maritime transport, even though in practice most customers use it on land. If you want to store things sensitive to moisture (furniture, electronics, documents) in it, CW is unequivocally the minimum required quality.

One Way / IICL (“after one voyage”)

The highest quality among used containers. The container was manufactured in Asia, loaded with goods and transported once to Europe. After unloading, it is sold — so it has made only one sea voyage. It is practically new: without corrosion, without odor, with an undamaged floor and shiny paint. IICL certification guarantees the highest standard. The price is 40–60% higher than CW, but you get a container with a lifespan of another 15–20 years.

Shipping container transport Prague — price and options

Transport is an item that many buyers forget about — and then they are unpleasantly surprised. An empty 20-foot container weighs over 2 tons and you cannot move it without heavy equipment. Here is an overview of what you need to know.

How much does container transport cost in Prague?

DistanceApproximate transport price (excl. VAT)
Prague and close surroundings (up to 30 km from depot)3,500 – 5,000 CZK
Central Bohemia (up to 80 km)5,000 – 7,000 CZK
Entire Czech Republic7,000 – 10,000 CZK

How does the transport take place?

The vast majority of dealers in Prague use a truck with a hydraulic arm (HR). This allows the container to be not only transported, but also placed on site. The driver picks up the container at the depot, transports it to your address and, using the hydraulic arm, places it on the prepared place. The whole process usually takes a few hours.

Practical tip: Before the carrier arrives, prepare a firm and level base. Ideally compacted gravel, a concrete slab, or at least firm panels. A container placed directly on soil will sag over time and the doors may stop fitting properly. Also remember to check whether a sufficiently wide access road leads to the unloading site — a truck with a hydraulic arm needs a width of at least 3 meters and a clearance height of at least 4 meters.

How to inspect a used shipping container before purchase?

There are several critical points you should always verify. Here is a practical checklist:

1. Tightness of roof and walls

The basis of everything. Even a small leak means that during the first rain you will have water in the container. During the inspection, stand inside, close the doors and look to see if light is penetrating anywhere. If so, there is a hole there. Also watch for rusty stains on the ceiling — they may signal leakage.

2. Condition of the wooden floor

The floor is the Achilles heel of used containers. Inspect it to see if it is rotten, cracked or affected by mold. Try to stomp on it — if it bends or makes a hollow sound, it is weakened. Replacing the floor is an expensive matter that can even exceed the price of the container itself.

3. Functionality of doors and sealing

The double-leaf doors must open and close smoothly. Check the hinges, locking rods and handles — everything should work without excessive force. The rubber seal around the door perimeter must be intact and flexible. Hardened or cracked sealing needs to be replaced, otherwise the container will not seal.

4. CSC plate

Every shipping container that has been used in maritime transport bears a so-called CSC plate (Convention for Safe Containers) on the doors. It contains identification data, date of manufacture and date of last inspection. A valid CSC plate is proof that the container has passed a technical inspection and meets safety standards. With AS IS containers, the CSC plate may already be invalid — but that does not mean the container cannot be used as a storage.

5. Overall condition of the structure

Inspect the corners, frame and walls. Minor dents are a cosmetic defect, but cracks in the frame or heavily corroded corner castings may indicate a structural problem. The container should stand squarely on all four corners.

HZ Containers comes out as the cheapest option for buyers looking for a container in the AS IS category.

Experience with buying a container in Prague — what to watch out for

Based on the experience of buyers and market analysis, we have summarized the most common mistakes people make when buying:

  1. Buying based on the lowest price without inspection. A cheap AS IS container may be fine — but it may also have a rotten floor that you cannot recognize from a photo. Always ask for detailed photos of the interior, or visit in person for an inspection.
  2. Underestimating transport and placement. A container for 39,000 CZK may eventually cost 48,000 CZK after transport and VAT are added. Always have the final price calculated “turnkey”.
  3. Unsuitable base. Placing the container on bare ground is the fastest way to problems with moisture and corrosion. An investment in a gravel bed or concrete footings pays off.
  4. Ignoring legal restrictions. In some areas (especially in heritage zones or housing estates) the placement of a container may be restricted by a local ordinance. Before buying, check whether you need the consent of the building authority.

FAQ

What are the dimensions of a 20ft shipping container?

A standard 20-foot shipping container has external dimensions of 6,058 × 2,438 × 2,591 mm (length × width × height). The internal volume is approximately 33.2 m³. An empty container weighs approximately 2,200 kg.

What does Cargo Worthy mean for a container?

Cargo Worthy (CW) is a quality designation meaning that the container is dry, tight, has functional doors and sealing, and a valid CSC plate. It is technically fit for further maritime transport. For ordinary storage, it is the most commonly recommended category.

How much does shipping container transport cost in Prague?

The transport price of a 20-foot container within Prague and the close surroundings ranges between 3,500 and 5,000 CZK excl. VAT. Some dealers (e.g. HZ Containers) offer transport at a fixed price of 3,500 CZK throughout the Czech Republic for containers up to 20 feet in size.

What is the difference between a shipping and a storage container?

A shipping (maritime) container is made of COR-TEN steel according to the ISO standard, has standardized dimensions and is designed for maritime transport. A storage container is of lighter construction, usually fully welded from galvanized sheet metal, and is intended exclusively for ground storage. The shipping container is more robust and has a longer lifespan.

Can a used shipping container be converted into housing?

Yes, a used shipping container can be converted into a living space, workshop or office. However, it is necessary to count on additional costs for insulation, electrical installation, heating, windows and doors. Some dealers (e.g. Locont) offer containers already adapted for housing. Before conversion, we recommend consulting the project with the building authority.

Is a building permit required for a container?

For placing a shipping container on land, a building permit is usually not required if it serves as storage and is not firmly attached to the ground. However, if you plan to convert the container for permanent housing or firmly anchor it to foundations, a building permit is required. It always pays to check the conditions at the specific building authority.

Can a used 20ft container be bought in a different color?

Used containers are standardly available in the colors in which they were operated by shipping companies — most often blue, green, brown or gray. If you require a specific color (e.g. anthracite RAL 7016), some dealers (HZ Containers) offer the option of repainting. An alternative is to buy a One Way container, which is often available in attractive RAL shades.

How long does a used shipping container last?

The lifespan of a shipping container depends on the conditions in which it is placed. With proper placement on a drained base and regular maintenance (sealing check, corrosion treatment), a Cargo Worthy container will last 15–20 years. A One Way container with the same care can serve for over 25 years.



More container news...

Corner Casting Lifting & Stacking

13. 11. 2026

A corner casting is the standardized steel fitting welded into all eight corners of an ISO shipping container, and it is the single most important structural interface in modern intermodal transport. Every time a crane lifts a 30-ton container, every time a stack of boxes rides nine or ten high across the ocean, and every time a container is locked to a truck chassis or rail car, the entire force of the operation travels through these unremarkable-looking metal blocks.

What Are the Internal Dimensions of a 40 Foot Container?

10. 11. 2026

A standard 40-foot dry shipping container has internal dimensions of 12,032 mm in length, 2,352 mm in width, and 2,395 mm in height — or approximately 39 feet 5⅝ inches × 7 feet 8⅝ inches × 7 feet 10¼ inches. These figures come from the published specifications of major shipping lines and align with the ISO 668 international standard for Series 1 freight containers. The internal capacity is roughly 67.7 cubic meters (2,390 cubic feet).

what is the internal dimensions of a 40 foot container

9. 11. 2026

A standard 40-foot shipping container has internal dimensions of approximately 12.032 meters (39 feet 5⅝ inches) in length, 2.352 meters (7 feet 8⅝ inches) in width, and 2.395 meters (7 feet 10¼ inches) in height. These internal dimensions are significantly smaller than the external dimensions because the corrugated steel walls, structural frame, corner posts, and the floor system—composed of plywood and steel—occupy valuable space intended for cargo.

What Is the Shipping Cost for a 40ft High Cube Container?

6. 11. 2026

The shipping cost for a 40ft high cube container is not a single number — it is a layered calculation spanning purchase price, international ocean freight, and local ground delivery. A used 40ft high cube container typically costs $1,550 to $5,500 to purchase, while a new one-trip unit runs $2,800 to $9,000 depending on condition, location, and whether delivery is included.