Weight difference between a 20ft and 40ft container

27. 7. 2026

When you plan the transport of goods, one of the first questions is: a 20ft or a 40ft container? And immediately after it comes another one — what actually is the weight difference between them? The answer is not just a single number. Three fundamental concepts enter the game: tara (the actual weight of an empty container), payload (useful load) and gross (maximum total weight). Understanding these values decides how much cargo you actually carry, how much you pay for transport, and whether your shipment will even pass a road check.

This article offers a complete and accurate comparison of the weight parameters of both containers, explains a practical paradox that surprises many carriers, and offers specific recommendations for choosing the right type according to the character of your cargo.

What the terms tara, gross and payload mean for shipping containers

Before we dive into specific numbers, it is essential to understand the three basic terms that define the weight limits of shipping containers. Without knowing them, you will easily get lost in technical specifications.

Tara (in English tare weight) is the weight of an empty container — that is, the steel structure itself without any cargo. This value is fixed by the manufacturer and is stamped on a plate on the doors of every container. Tara differs slightly between individual units depending on the manufacturer, age and specific design, but it moves within defined ranges.

Payload (in English payload or net weight) represents the maximum weight of cargo that can be safely loaded into the container. It is calculated simply:

Payload = Gross − Tara

Gross (in English maximum gross mass, abbreviated MGM) is the maximum permitted total weight of the container including cargo. This value is set by the international ISO standard and for standard containers it is 30,480 kg (67,200 lb). Some newer container types may have a higher value, but the classic standard is exactly the aforementioned 30,480 kg.

How to read these values on a container plate

Every shipping container carries a safety plate on its doors (the so-called CSC plate), where all three values are clearly stated. If you are standing in front of a physical container and need to know the exact tara weight, look on the plate for the line marked TARE — the number is given in kilograms and pounds. You will likewise find MAX GROSS (gross) and PAYLOAD (payload) there. Actual values can differ from typical averages by up to several hundred kilograms, which is why, when planning heavy loads, it always pays off to verify the specific unit.

Weight of a 20ft container: tara, payload and gross

The standard 20ft container (also designated 20GP, 20′ DC or 20ft Dry Van) is the basic unit of container transport. It is shorter, more compact and — which is crucial for heavy loads — it has a higher useful payload than its longer counterpart.

ParameterValue
Tara (empty container)2,100–2,400 kg (typically ~2,200 kg)
Maximum payload28,000–28,380 kg (typically ~28,200 kg)
Maximum gross weight (MGM)30,480 kg
Internal volume33.2 m³
Internal dimensions (L × W × H)5.90 × 2.35 × 2.39 m

Why is a 20ft container suitable for heavy cargo? The answer is simple: it is lighter itself. When you subtract the tara of approximately 2,200 kg from the maximum gross weight of 30,480 kg, you are left with approximately 28,200 kg for cargo. That makes it an ideal choice for transporting machine parts, metal products, building materials, tiles, bricks or any goods with high density.

Practical example

If you are shipping steel ingots, each weighing 1,000 kg, you could theoretically load up to 28 of them into a 20ft container. In practice, however, you must also take into account the even distribution of weight — the cargo must be spread so that the centre of gravity remains in the middle of the container and does not load the floor or the chassis axles on one side.

Weight of a 40ft container: tara, payload and gross

The standard 40ft container (40GP, 40′ DC, 40ft Dry Van) offers double the volume, but in its weight parameters it hides a paradox surprising to many.

ParameterValue
Tara (empty container)3,700–3,900 kg (typically ~3,750 kg)
Maximum payload26,500–26,780 kg (typically ~26,700 kg)
Maximum gross weight (MGM)30,480 kg
Internal volume67.7 m³
Internal dimensions (L × W × H)12.03 × 2.35 × 2.39 m

Note: the maximum gross weight is the same as for a 20ft container — 30,480 kg. However, a 40ft container is itself heavier by approximately 1,500 kg. That means fewer kilograms remain for cargo. The typical payload of a 40ft container is approximately 26,700 kg, which is roughly 1,500 kg less than that of a 20ft one.

Who a 40ft container is ideal for

A 40ft container is built for volume, not weight cargo. If you are shipping furniture, textiles, electronics, plastic products, footwear, toys or any light goods that quickly fill the space but do not reach the weight limit, a 40ft container is the right choice. With an internal volume of 67.7 m³ it offers more than double the space compared with the 20ft variant.

Weight difference between a 20ft and 40ft container: a complete comparison

Now we come to the core of the matter — a direct comparison of all three weight parameters. The following table summarises the key differences:

Parameter20ft container40ft containerDifference
Tara (own weight)~2,200 kg~3,750 kg+1,550 kg (40ft is heavier)
Cargo payload~28,200 kg~26,700 kg−1,500 kg (40ft carries less)
Maximum gross30,480 kg30,480 kgSame (ISO standard)
Internal volume33.2 m³67.7 m³+34.5 m³ (40ft is 2× larger)

A paradox that surprises more than one carrier

Many people intuitively assume that a larger container carries more cargo. With shipping containers, however, this is not true — a 40ft container is 1.5 tonnes heavier, yet it carries 1.5 tonnes less cargo. The reason is the standardised maximum total weight of 30,480 kg valid for both types. A longer container requires more steel, a stronger structure and therefore also a higher own weight. Every extra kilogram of tara means one kilogram less for cargo.

Practical rule: If your cargo exceeds 26,500 kg, you need a 20ft container regardless of how much volume it takes up. If your cargo exceeds 33 m³ but weighs less than 26,500 kg, you need a 40ft container.

Weight difference with the High Cube variant

Besides standard containers there are also High Cube variants (HC), which are 30 cm taller (internal height 2.70 m versus 2.39 m). How do their weight parameters differ?

Parameter20ft High Cube40ft High Cube
Tara~2,300–2,500 kg~3,900–4,200 kg
Payload~28,000 kg~26,200–26,500 kg
Gross30,480 kg30,480 kg (sometimes up to 32,500 kg)
Internal volume~37.4 m³~76.3 m³

A High Cube container is always somewhat heavier than its standard counterpart, because taller walls require more material. With a 40ft High Cube this means the payload drops to approximately 26,200 kg, i.e. roughly 500 kg less than a standard 40ft container. On the other hand, it offers 13% more volume, which is advantageous for very light and bulky goods.

Road limits: why 30,480 kg gross is often only a theoretical number

The maximum gross weight of 30,480 kg is the technical limit of a container according to the ISO standard. In practice, however, you will encounter legal limits of road transport, which are often significantly stricter.

In the Czech Republic and most of the European Union, the maximum permitted weight of a vehicle combination for truck transport is 40 tonnes (in international transport; some domestic routes have a limit of 48 tonnes). This includes the tractor, the chassis, the container itself and the cargo. A typical tractor with a semi-trailer weighs approximately 14–15 tonnes. When you add the tara of a 40ft container (~3.75 t), only 21–22 tonnes remain for cargo — significantly less than the technical payload of the container.

ItemWeight
Tractor + semi-trailer~14,500 kg
Tara of 40ft container~3,750 kg
Remaining for cargo~21,750 kg
Total40,000 kg (legal limit)

With a 20ft container the situation is similar. Even though the container itself can carry up to 28 tonnes, the road limit of the vehicle combination often reduces the real payload to approximately 23–24 tonnes (depending on the weight of the tractor).

Practical advice: Before planning a heavy shipment, always verify not only the container parameters but also the weight limits for road transport in the specific countries through which the shipment will pass. Some countries have lower limits than the Czech Republic.

Weight limits of sea containers according to SOLAS regulations

Since 1 July 2016, the international SOLAS convention (Safety of Life at Sea) has applied, which requires every loaded container to have a verified gross mass (Verified Gross Mass, VGM) before being loaded onto a ship. This rule was introduced in response to serious accidents caused by incorrectly declared weight.

There are two methods of determining VGM:

  1. Weighing the entire loaded container on a calibrated scale.
  2. Weighing the individual cargo items and adding them to the container tara.

Without documented VGM, a container must not be loaded onto a ship. This rule applies to all shipping containers regardless of size.

How to find the actual tara weight of a container from the plate

If you need to know the exact own weight of a specific container (and not just a typical range), proceed as follows:

  1. Find the metal CSC (Container Safety Convention) plate on the container doors. It is usually located on the left door leaf.
  2. On the plate, look for the following data:
    • TARE — weight of the empty container in kg and lb
    • MAX GROSS or MGM — maximum total weight
    • PAYLOAD or NET — maximum cargo payload
  3. Also check the date of the last periodic inspection (marked as NEXT EXAMINATION DATE). An expired container must not be used for international transport.

Every container also has a unique identification number (BIC code) on the roof, side walls and doors. Using this number, details about the container can be traced in operator databases.

Which container carries more cargo — 20ft or 40ft?

This is perhaps the most frequent question shippers ask themselves. The answer is:

  • A 20ft container carries more cargo in terms of weight (by ~1,500 kg).
  • A 40ft container carries more cargo in terms of volume (by ~34.5 m³).

The choice therefore depends on the character of your goods:

Type of cargoRecommended container
Heavy and compact goods (machines, metals, bricks, tiles)20ft
Light and bulky goods (furniture, textiles, electronics)40ft
Combination of weight above 26.5 t and volume below 33 m³20ft
Combination of weight below 26.5 t and volume above 33 m³40ft
Extremely light and bulky goods (insulation, hollow plastics)40ft High Cube

FAQ

What is the exact weight difference between a 20ft and 40ft container?

The difference in tara weight (own weight of an empty container) is approximately 1,500–1,550 kg. A 20ft container weighs typically 2,200 kg empty, a 40ft one approximately 3,750 kg. The difference in payload is the opposite — a 20ft container carries 1,500 kg more cargo than a 40ft one.

What is the maximum total weight (gross) of a 20ft and 40ft container?

The maximum gross weight is, for both types as standard, 30,480 kg according to the ISO standard. Some newer containers (especially 40ft High Cube) may have a gross of up to 32,500 kg, but the classic standard is 30,480 kg.

How much does an empty 20ft container weigh?

An empty 20ft container (tara) weighs 2,100–2,400 kg, typically around 2,200 kg. The exact value depends on the manufacturer, age and specific design.

How much does an empty 40ft container weigh?

An empty 40ft container (tara) weighs 3,700–3,900 kg, typically around 3,750 kg. Here too, the exact value varies according to the manufacturer and design.

Why does a 40ft container carry less cargo than a 20ft one?

Because the maximum total weight (gross) is the same for both types — 30,480 kg — and the 40ft container is itself heavier. The larger structure requires more steel, so fewer kilograms remain for cargo. Specifically: 30,480 − 3,750 = 26,730 kg for the 40ft, while 30,480 − 2,200 = 28,280 kg for the 20ft.

How do I find the actual tara weight of a specific container?

You will find the actual tara weight on the CSC plate on the container doors. Every container has this value individually determined by the manufacturer and it is given in kilograms and pounds.

What are tara, gross and net for containers?

Tara is the weight of an empty container. Gross (MGM) is the maximum permitted total weight of the container including cargo. Net (payload) is the maximum weight of cargo that can be loaded into the container. The relationship is: Gross = Tara + Payload.

What is the weight difference between a standard and a High Cube container?

A High Cube container is always somewhat heavier than the standard version. For a 20ft HC the tara is approximately 2,300–2,500 kg (standard ~2,200 kg). For a 40ft HC the tara is around 3,900–4,200 kg (standard ~3,750 kg). The difference is due to the taller structure, which requires more material.

Do road limits affect how much cargo I can actually transport?

Yes, significantly. While the technical payload of a container is 26–28 tonnes, road limits in the EU restrict the total weight of the vehicle combination to 40 tonnes. After subtracting the tractor, semi-trailer and container tara, only 21–24 tonnes realistically remain for cargo, depending on the type of combination and container.



More container news...

What Are the Internal Dimensions of a 40 Foot Container?

10. 11. 2026

A standard 40-foot dry shipping container has internal dimensions of 12,032 mm in length, 2,352 mm in width, and 2,395 mm in height — or approximately 39 feet 5⅝ inches × 7 feet 8⅝ inches × 7 feet 10¼ inches. These figures come from the published specifications of major shipping lines and align with the ISO 668 international standard for Series 1 freight containers. The internal capacity is roughly 67.7 cubic meters (2,390 cubic feet).

what is the internal dimensions of a 40 foot container

9. 11. 2026

A standard 40-foot shipping container has internal dimensions of approximately 12.032 meters (39 feet 5⅝ inches) in length, 2.352 meters (7 feet 8⅝ inches) in width, and 2.395 meters (7 feet 10¼ inches) in height. These internal dimensions are significantly smaller than the external dimensions because the corrugated steel walls, structural frame, corner posts, and the floor system—composed of plywood and steel—occupy valuable space intended for cargo.

What Is the Shipping Cost for a 40ft High Cube Container?

6. 11. 2026

The shipping cost for a 40ft high cube container is not a single number — it is a layered calculation spanning purchase price, international ocean freight, and local ground delivery. A used 40ft high cube container typically costs $1,550 to $5,500 to purchase, while a new one-trip unit runs $2,800 to $9,000 depending on condition, location, and whether delivery is included.

Shipping container types

26. 10. 2026

Roughly 80% of everything you own traveled to you inside a steel box. Shipping containers—also called cargo containers, ISO containers, or “conex” boxes—are the backbone of global trade, carrying about 90% of the world’s non-bulk cargo across oceans, rails, and highways. Yet a “shipping container” is not one single object. It is a family of specialized steel boxes, each engineered for a specific kind of cargo: some vent, some freeze, some open from the top, and some have no walls at all.