Wheeled system for moving containers – container lifting and mobility system 10T

Do you need to move shipping containers quickly, safely, and without heavy equipment directly on site? The mobile wheeled system for handling containers with a load capacity of 10 tons (catalog number HZ10T‑WSMC) allows you to relocate even a fully loaded container on your own, without a crane and without structural modifications. This innovative handling set saves up to 50% of time and operating costs compared to traditional methods, while remaining simple to install and operate. The transport price offer will be calculated according to the destination – therefore it is ideal to send the delivery address and postal code along with your inquiry.

Quick Offer Specifications

Catalog number: HZ10T-WSMC

• Easy installation on standard ISO corners without the need for structural modifications.
• Compatible with containers according to ISO 668 and with corner castings according to ISO 1161.
• Double swivel wheel made of high-strength polyamide.
• Maximum load capacity of the system: 10,000 kg.
• Maximum load capacity per support: 5,000 kg.
• Total height: 612 mm.
• Lift length: 200 mm.
• Terrain slope: 4º.
• Wind force: 50 km/h. Operating temperature range: -20º/+50º.
• Weight of one support: 57 kg.
• Total weight of the set (4 supports): 228 kg.
• Color RAL 3020 M / other colors available.

The transport price offer will be calculated according to the destination – therefore it is ideal to send the delivery address and postal code along with your inquiry.

Also known as: Container lifting and moving system, Container handling and lifting system, Wheel set for container handling, Wheeled system for container handling, Mobile system for container handling.

Load Capacity and Technical Parameters

The total maximum load capacity of the system is 10,000 kg, with each support capable of bearing up to 5,000 kg. This means that even a heavily loaded container is distributed across four points with sufficient reserve. The total height of the support is 612 mm, so the lifted container remains stable and low above the ground. The weight of one support is 57 kg, and the entire set of four supports weighs 228 kg – the individual parts can be easily handled, transported, and stored.

Mobility and Transport of the Set

Although the system is primarily designed for moving containers, its own mobility is excellent. The individual supports can be carried, transported on a pallet, or in a van. On-site installation itself takes only tens of minutes and requires no special tools.

What the System Is Used For and Who It Is Designed For

The container lifting and moving system is designed for anyone who works with storage, shipping, or residential containers and needs to move them frequently. It is suitable for construction companies, logistics facilities, production halls, agricultural operations, as well as for container rental companies and dealers. You will use it everywhere where it is not possible or economical to deploy heavy equipment – for example, inside halls, in hard-to-access yards, on unpaved surfaces, or during short moves between working positions.

Easy Installation Without Container Modifications

One of the strongest advantages of the system is its immediate assembly on the standard ISO corner fittings of the container. Each support is inserted into the lower corner casting according to ISO 1161, so there is no need to structurally modify, drill, or weld the container in any way. The system is fully compatible with all containers meeting the ISO 668 standard, whether they are storage, residential, sanitary, or refrigerated units. Installation can be done manually and within a few minutes.

Lifting with Individual Screw Jacks

Each of the four supports is equipped with a robust screw jack that allows you to lift the container off the ground – completely smoothly and safely. The lift is 200 mm, which is more than sufficient to pass under the support and to overcome minor unevenness. Thanks to the independent control of the jacks, you can easily level slightly uneven terrain up to a slope of 4° without compromising stability. Lifting is performed manually, so you do not need electricity, hydraulics, or compressed air. Even with full load, the operation is smooth and safe.

Safe and Stable Container Movement

After lifting, the container rests on four double swivel wheels made of high-strength polyamide. These ensure quiet, smooth movement on concrete, asphalt, paving, and on paved surfaces. The swivel design allows maneuvering in small spaces, turning on the spot, and precise positioning into the required location. The system is designed for operation in wind up to 50 km/h and in a temperature range from -20 °C to +50 °C, so it reliably functions throughout the year, even in demanding outdoor conditions.

Other Uses and Possibilities

The system is not just for simple moving – the well-thought-out design offers a number of other possibilities. It allows, for example:

• precise placement of the container on foundation pads or supporting blocks,
• working with the container in temporary storage mode, when you move it during the day and return it in the evening,
• service access to the bottom of the container or to the chassis,
• handling containers indoors without emissions and noise,
• easy pairing of multiple units into assemblies.

The standard color of the supports is RAL 3020 M (traffic red), but other color versions are available on request, so the system can be adapted to corporate colors or a specific operation.

Practical Recommendations and Tips

Before each use, check the condition of the running surfaces – polyamide wheels are durable, but sharp objects or large unevenness can affect the smoothness of movement. When moving on the maximum slope of 4°, make sure the container is leveled and lifted symmetrically. If you plan frequent moves on unpaved surfaces, we recommend using drive-over plates or distribution boards, which will further increase safety. The system complements other handling equipment perfectly, such as low-lift trucks or small tugs – to speed up moving over longer distances, the container on wheels can be easily hitched.

The mobile wheeled system for handling containers up to 10 tons is a practical and economical solution for anyone looking for a fast, safe, and flexible way to move shipping containers without heavy equipment. Thanks to easy installation, high load capacity, independent lifting, and durable swivel wheels, you can handle even demanding handling tasks on your own and with minimal costs. Whether you operate a warehouse, rental facility, construction site, or production hall, this system will become an indispensable helper. If you are interested in a price quote including transport, please send us an inquiry with the delivery address and postal code – we will be happy to prepare an individual calculation for you.